1.            C.A. Borghi, M. Fabbri, “A Global Optimization Method for the Solution of a Magnetic Field Synthesis Problem”, IEEE Transactions on Magnetics, vol. 32, n. 3, pp. 1897-1904, May 1996. 

2.             C.A. Borghi, M. Fabbri, “A Combined Technique for the Global Optimization of the Inverse Electromagnetic Problem Solution”, IEEE Transactions on Magnetics, vol. 33, n. 2, pp. 1947-1950, March 1997. 

3.             F. Negrini, P.L. Ribani, M. Fabbri, A. Cristofolini, P.  La Cascia , “Modeling of High Temperature Superconducting Bearings”, Il Nuovo Cimento, vol. 19D, n. 8-9, pp. 1483-1488, 1997.

4.             C.A. Borghi, M. Fabbri, "Iron Shielded MRI Optimization", The European Physical Journal – Applied Physics, vol. 3, pp.343-348, July 1998. 

5.             C.A. Borghi, D. Casadei, M. Fabbri, G. Serra, "Reduction of the Torque Ripple in Permanent Magnet Actuators by a Multi-Objective Minimization Technique", IEEE Transactions on Magnetics, vol. 34, n. 5, pp. 2869-2872, Sept. 1998. 

6.             C.A. Borghi, A. Cristofolini, M. Fabbri, "Study of the Design Model of a Liquid Metal Induction Pump", IEEE Transactions on Magnetics, vol. 34, n. 5, pp. 2956-2959, Sept. 1998.

7.             C.A. Borghi, P. Di Barba, M. Fabbri, and A. Savini, “A Comparative Study of the Loney’s Solenoid by Different Techniques of Global Optimization”, International Journal of Applied Electromagnetics and Mechanics, vol. 10, pp. 417-423, 1999.

8.             C.A. Borghi, P. Di Barba, M. Fabbri, A. Savini, “Loney’s solenoid Multi-Objective Optimization Problem”, IEEE Transactions on Magnetics, vol. 35, n.3, pp. 1706-1709, May 1999.

9.             C.A. Borghi, D. Casadei, A. Cristofolini, M. Fabbri, G. Serra, “Application of a Multi-objective Minimization Technique for reducing the Torque Ripple in Permanent Magnet Motors”, IEEE Transactions on Magnetics, vol. 35, n. 5, pp. 4238-4246, Sept. 1999.

10.         C.A. Borghi, M. Fabbri and P.L. Ribani, “Design Optimization of a Microsuperconducting Magnetic Energy Storage System”, IEEE Transactions on Magnetics, vol. 35, n. 5, pp. 4275-4284, Sept. 1999.

11.         M. Fabbri, F. Negrini and P.L. Ribani, “Optimized Magnetic Design of a High Temperature Micro-SMES”, International Journal of Modern Physics B, vol. 13, n. 9&10, pp. 1351-1356, 1999.

12.         E. Takeuchi, F. Negrini, M. Fabbri, M. Tani and M. Zuccarini, “Electromagnetic Control of the Meniscus Shape during Casting in a High-frequency Magnetic Field”, Energy Conversion & Management, vol. 41, n. 15, pp. 1678-1701, June 2000.

13.         C.A. Borghi, M. Fabbri, F. Mastri, V. Rizzoli, “Deterministic and Stochastic Optimization of RF Nonlinear Circuits”, Non-Linear Electromagnetic Systems, P. Di Barba and A. Savini (Eds.), IOS Press, ISBN 978-1-58603-024-7, Amsterdam (NL), pp. 439-442, 2000.

14.         C.A. Borghi, P. Di Barba, M. Fabbri, M. Rudnicki, A. Savini, “A benchmark problem in inverse magnetostatics solved by different multi-objective optimization methods”, International Journal of Applied Electromagnetics and Mechanics, vol. 12, n. 3/4, pp. 219-227, 2000.

15.         I. Montanari, M. Fabbri, E. Di Leo, “Variational Approach to the Electromagnetic Field Computation in Dielectric Dispersive Media”, Electromagnetics, vol. 21, n. 2, pp. 139, 146, 2001.

16.         M. Fabbri, P.L. Ribani, “A-priori Error Bounds on Potentials, Fields and Energies Evaluated with a Modified Kernel”, IEEE Transactions on Magnetics, vol. 37, n. 4, pp. 2970-2976, July 2001.

17.         M. Fabbri, F. Negrini, P.G. Albano, M. Pretelli, H. Ohsaki, “Flux Trapping in a Ring-shaped YBCO Bulk by Pulsed Field Magnetization”, IEEE Transactions on Applied Superconductivity, vol. 11, n. 4, pp. 4116-4122, Dec. 2001.

18.         P.G. Albano, C.A. Borghi, A. Cristofolini, M. Fabbri, Y. Kishimoto, F. Negrini, H. Shibata, M. Zanetti, “Industrial Applications of MagnetoHydroDynamics at the University of Bologna”, Energy Conversion & Management, vol 43, n. 3, pp 353-363, 2002.

19.         C.A. Borghi, D. Casadei, A. Cristofolini, M. Fabbri, G. Serra, “Minimizing Torque Ripple in Permanent Magnet Synchronous Motors with Polymer bonded Magnets”, IEEE Transactions on Magnetics, vol. 38, n. 2, pp. 1371-1377, March 2002.

20.         A. Morandi, A. Cristofolini, M. Fabbri, F. Negrini, P.L. Ribani, “Current distribution in a composite superconducting system by means of an equivalent circuit model based on a smooth E-J characteristic”, Physica C, vol. 372-376, pp. 1771-1776, 2002.

21.         L. Trevisani, T. Kuriyama, F. Negrini, T. Okamura, Y. Ohtani, M. Okamura, M. Fabbri, "Performance improvement of a two-stage GM cryocooler by use of Er(Ni_0.075Co_0.925)₂ magnetic regenerator material," Cryogenics, vol. 42, n. 10, pp. 653-657, Dec. 2002.

22.         L. Bottura, M. Breschi, M. Fabbri, “Analytical Solution for the Current Distribution in Multistrand Superconducting Cables”, Journal of Applied Physics, vol. 92, n. 12, pp. 7571-7580, Dec. 2002.

23.         S. Asai, F. Colli, M. Fabbri, F. Negrini, K. Sassa, “Removal of SiC Inclusions in Molten Aluminium using a 12 T Static Magnetic Field”, COMPEL, vol. 22, n. 1, pp. 58-67, 2003.

24.         E. Takeuchi, F. Negrini, M. Fabbri, T. Toh, F. Galante, “Influence of the Electro-Magnetic Stirring on the Boundary Layer of a Molten Steel Pool”, COMPEL, vol. 22, n. 1, pp. 10-19, 2003.

25.         L. Bottura, M. Breschi, M. Fabbri, “An analytical benchmark for the calculation of current distribution in superconducting cables”, Cryogenics, vol. 43, n. 3-5, pp. 241-248, 2003.

26.         C. A. Borghi, M. Breschi, M. Fabbri, I. Montanari, “Material Optimization of Ferromagnetic Shields”, IEEE Transactions on Magnetics, vol. 39, n. 3, pp. 1317 -1320, May 2003.

27.         M. Fabbri, A. Morandi, P.L. Ribani, “Magnetization Distribution in a Superconducting Bulk by means of an Equivalent Circuit Model based on a Hysteretic Material Characteristic”, IEEE Transactions on Magnetics, vol. 39, n. 3, pp. 1345-1348, May 2003.

28.         M. Breschi, L. Bottura, M. Fabbri, “Analytical calculation of current distribution in multistrand superconducting cables”, IEEE Transactions on Applied Superconductivity, vol. 13, n. 2, pp. 1710-1713, June  2003.

29.         M. Breschi, M. Fabbri, F. Negrini, P.L. Ribani, “Combined modeling of cables and joints/terminations for the electromagnetic analysis of superconducting cables”, IEEE Transactions on Applied Superconductivity, vol. 13, n. 2, pp. 2400-2403, June  2003.

30.         C.A. Borghi, M. Fabbri, A. Lipparini, F. Mastri, V. Rizzoli, “Computer-Aided Optimization of Broadband Nonlinear RF/Microwave Circuits by evolutionary Algorithms Coupled with Neural Models”, Microwave and Optical Technology Letters, vol. 38, n. 1, pp. 46-52, July 2003.

31.         M. Fabbri, D. Ajiki, F. Negrini, R. Shimada, H. Tsutsui, F. Venturi, “Tilted Toroidal coils for SMES Systems”, IEEE Transactions on Magnetics, vol. 39, n. 6, pp. 3546-3550, Nov. 2003.

32.         M. Fabbri, A. Morandi, F. Negrini, P.L. Ribani, “Magnetic Shield Type Fault Current Limiter Equivalent Circuit”, IEEE Transactions on Applied Superconductivity, vol. 14, n. 3, pp. 1966-1973, Sept. 2004.

33.         M. Fabbri, A. Morandi, F. Negrini, P.L. Ribani, L. Trevisani, "Experimental validation of magnetic shield type fault current limiter circuit model", Institute of Physics Conference Series, 181, CRC press, ISBN 0-7503-0981-4, pp. 819 - 826, 2004.

34.         M. Breschi, M. Fabbri, F. Negrini, P.L. Ribani, "Electrodynamic effects of induction coupling between strands in superconducting cables", Institute of Physics Conference Series, 181, CRC press, ISBN 0-7503-0981-4, pp.424 - 431, 2004.

35.         D. De Palma, T. Oide, H. Hatta, T. Nitta, F. Negrini, M. Fabbri, A. Morandi, "Tests and model of transformer type high temperature superconducting fault current limiter with adjustable trigger current level", Institute of Physics Conference Series, 181, CRC press,  ISBN 0-7503-0981-4, pp.725 - 732, 2004.

36.         M. Fabbri, A. Morandi, F. Negrini, “Temperature distribution in aluminium billets heated by rotation in static magnetic field produced by superconducting magnets”, COMPEL, vol. 24, n. 1, pp. 281-290, 2005.

37.         M. Breschi, M. Fabbri, F. Negrini, P.L. Ribani, “Influence of strand deviations from nominal geometry on ac losses in multistrand superconducting cables”, IEEE Transactions on Applied Superconductivity, vol. 15, n. 2, pp. 1587 - 1590, June 2005.

38.         M. Fabbri, A. Morandi F. Negrini, P.L. Ribani, “Temperature dependent equivalent circuit of a magnetic shield type SFCL”, IEEE Transactions on Applied Superconductivity, vol. 15, n. 2, pp. 2078 - 2081, June 2005.

39.         L. Trevisani, M. Fabbri, F. Negrini, “Long-term Scenarios for Energy and Environment: Energy from the Desert with Very Large Solar Plants using Liquid Hydrogen and Superconducting Technologies”, Fuel Processing Technology, vol. 87, n. 2, pp. 157-161, Jan.  2006.

40.         L. Martini, M. Bocchi, A. Morandi, M. Fabbri, F. Negrini, P.L. Ribani, “Limitatori di corrente superconduttivi: confronto tra le diverse tipologie” (in Italian) , AEIT, n. 5, pp. 22-31, Maggio 2006.

41.         A. Morandi, M. Fabbri, F. Negrini, P.L. Ribani, “Sensitivity of the Field Trapped by Superconducting Bulks on the Parameters of the Magnetization Process”, IEEE Transactions on Applied Superconductivity, vol. 16, n. 2, pp. 1570 – 1573, June 2006.

42.         A. Morandi, M. Bocchi, M. Fabbri, L. Martini, F. Negrini, P. L. Ribani, “Comparison of the Performances of Three Different Types of Fault Current Limiter in the Distribution Network”, Journal of Physics: Conference Series, vol. 43, pp. 909 – 912, 2006

43.         L. Trevisani, F. Negrini, M. Fabbri, P. L. Ribani, “Advanced Energy Recovering Systems from Liquid Hydrogen”, Energy Conversion & Management, vol. 48, pp. 146 – 154, 2007.

44.         L. Trevisani, M. Fabbri, F. Negrini, “Long distance RES power transmission using hydrogen-cooled MgB2 superconducting line”, Cryogenics, vol. 47, n. 2, pp. 113-120, Feb. 2007.

45.         M. Fabbri, “Magnetic flux density and vector potential of uniform polyhedral sources”, IEEE Transactions on Magnetics, vol. 44, n. 1, pp. 32-36, Jan.  2008.

46.         R. Araneo, F. Dughiero, M. Fabbri, M. Forzan, A. Geri, S. Lupi, A. Morandi, P. L. Ribani, G. Veca, "Electromagnetic and Thermal Analysis of the Induction Heating of Aluminium Billets Rotating in DC Magnetic Field", COMPEL, vol. 27, n. 2, pp. 467-479, 2008.

47.         M. Fabbri, A. Morandi, P.L. Ribani, "DC induction heating of aluminum billets using superconducting magnets", COMPEL, vol. 27, n. 2, pp. 480-490, 2008.

48.         A. Morandi, M. Fabbri, P.L. Ribani, “Design of a superconducting Saddle Magnet for DC Induction Heating of Aluminum Billets”, Accepted for publication on IEEE Transactions on Applied Superconductivity, Giugno 2008. [Presented at The 20th Biennial Conference on Magnet Technology (MT-20), 2B02, Philadelphia, Pennsylvania, August 27 - 31, 2007.]

49.         A. Morandi, M. Fabbri, F. Negrini, R. Penco, M. Perrella, P.L. Ribani, L. Trevisani, M. Tassisto, “Manufacturing and Testing of a 200 kJ Nb-Ti micro-SMES”, Accepted for publication on IEEE Transactions on Applied Superconductivity, Giugno 2008. [Presented at The 20th Biennial Conference on Magnet Technology (MT-20), 4T01, Philadelphia, Pennsylvania, August 27 - 31, 2007.]

50.         A. Morandi, L. Trevisani, P.L. Ribani, M. Fabbri, L. Martini, M. Bocchi, “Superconducting transformers: key design aspects for power applications”, Accepted for publication on Journal of Physics: Conference Series, 2008. [Presented at The 8th European Conference on Applied Superconductivity (EUCAS 2007), 0692-M2, p.92, Brussels, Belgium, 16-20 Sept. 2007]

 Patents

1.           L. Trevisani, A. Morandi, F. Negrini, P.L. Ribani, M. Fabbri, “Sistema di accumulo di energia elettrica e veicolo ibrido comprendente tale sistema” (in Italian), Brevetto per invenzione industriale BO 2007 A516, Luglio 2007.

 Reports

1.           F. Negrini, M. Fabbri, A. Cristofolini, P.L. Ribani, “Applicazioni Metallurgiche della Magnetofluidodinamica” (in Italian), Rapporto interno DIEUB, Giugno 1996.

2.           F. Negrini, M. Fabbri, A. Cristofolini, P.L. Ribani, “Tecnologie Elettromagnetiche per la Produzione di Materiali Innovativi” (in Italian), Rapporto interno DIEUB, Novembre 1996.

3.           M. Fabbri, “Metodi di ottimizzazione globale per problemi di sintesi magnetica” (in Italian), Tesi di Dottorato in Ingegneria Elettrotecnica, disponibile on line su www.die.ing.unibo.it/dottorato_it/index.htm, 1997.

4.           F. Negrini, P.G. Albano, M. Breschi, A. Cristofolini, M. Fabbri, P. La Cascia, P.L. Ribani, M. Zuccarini, “Applied MHD at the University of Bologna”, Atti ILG-MHD, Hokkaido University, Sapporo, Giappone, Feb. 1998.

5.           M. Fabbri, P.L. Ribani, “Progetto magnetico di uno SMES: teoria” (in Italian), Rapporto Interno DIE, Maggio 1998.

6.           M. Fabbri, P.L. Ribani, “Progetto magnetico di uno SMES: risultati” (in Italian), Rapporto Interno DIE, Giugno 1998.

7.           F. Negrini, C.A. Borghi, P.G. Albano, M. Breschi, F. Colli, A. Cristofolini, M. Fabbri, F. Galante, A. Morandi, P.L. Ribani, “Recent Developments on Industrial Applications of MHD at the University of Bologna”, Atti ILG-MHD, IVTAN, Moscow,  Russia, April 2001.

8.           M. Fabbri, M. Breschi, “Analytical solutions for the current distribution in a Rutherford Cable with N strends”, DIEUB Internal Report, April 2001.

9.          M. Fabbri, “An Analytical Solution for the current distribution in two 3-strands Rutherford cables coupled with a Resistive Joint”, DIEUB Internal Report, Sept. 2001.

10.        F. Negrini, L. Trevisani, M. Fabbri, “Studi teorici e sperimentali sull’utilizzo dei materiali magnetici nello scambiatore di calore di un cryocooler Gifford-McMahon” (in Italian), Rapporto Interno DIEUB, Giugno 2002.

11.        L. Bottura, M. Breschi, M. Fabbri, “Analytical Solution for the Current Distribution in Multistrand Superconducting Cables”, Divisional Report CERN  LHC/2002-24 (MTA), Sept. 2002.

12.        F. Negrini, M. Fabbri, A. Morandi, P.L. Ribani, L. Trevisani, "UTILiS: Utilizzo della Tecnologia dell’Idrogeno Liquido e dei Superconduttori per l’uso efficiente dell’energia elettrica prodotta da fonti rinnovabili" (in Italian), Stato del Sottoprogramma RESIST, pp.1-86, Settembre 2004.

13.        M. Breschi, M. Fabbri, A. Morandi, F. Negrini, P. L. Ribani, L. Trevisani, “Possibili scenari di impiego dei superconduttori SAT nei sistemi elettrici per l’energia” (in Italian), Rapporto Finale Contratto CESI-DIE/U1439/2004, Bologna, pp. 1-151, Dicembre 2004.

14.        F. Negrini, M. Fabbri, A. Morandi, P.L. Ribani, L. Trevisani, "UTILiS: Utilizzo della Tecnologia dell’Idrogeno Liquido e dei Superconduttori per l’uso efficiente dell’energia elettrica prodotta da fonti rinnovabili" (in Italian), Relazione Finale del Sottoprogramma RESIST, pp.1-152, Novembre 2005

15.        A. Morandi, L. Trevisani, P.L. Ribani, M. Fabbri, F. Negrini, G. Mariani, “Studio sui trasformatori superconduttivi ad alta temperatura critica” (in Italian), Rapporto Finale Contratto CESI-DIE/2006, Bologna, pp. 1-92, Novembre 2006.

16.        M. Breschi, M. Fabbri, A. Morandi, P.L. Ribani, “Tecnologie innovative ad alto rendimento nel riscaldamento ad induzione per trattamenti termici di billette e nastri di alluminio” (in Italian) – Rapporto PRIN2005/UNIBO/2006/001 – Settembre 2006.

17.        M. Fabbri, A. Morandi, P.L. Ribani, M. Forzan, S. Lupi “Tecnologie innovative ad alto rendimento nel riscaldamento ad induzione per trattamenti termici di billette e nastri di alluminio” (in Italian) – Rapporto PRIN2005/UNIBO/2006/002 – Novembre 2006.

18.        M. Fabbri, A. Morandi, P.L. Ribani, “Tecnologie innovative ad alto rendimento nel riscaldamento ad induzione per trattamenti termici di billette e nastri di alluminio” (in Italian) – Rapporto PRIN2005/UNIBO/2007/001 – Febbraio 2007.

19.        M. Fabbri, A. Morandi, P.L. Ribani, “Tecnologie innovative ad alto rendimento nel riscaldamento ad induzione per trattamenti termici di billette e nastri di alluminio” (in Italian) – Rapporto PRIN2005/UNIBO/2007/002 – Luglio 2007.

20.        M. Fabbri, A. Morandi, P.L. Ribani, M. Forzan, S. Lupi “Tecnologie innovative ad alto rendimento nel riscaldamento ad induzione per trattamenti termici di billette e nastri di alluminio” (in Italian) – Rapporto PRIN2005/UNIBO/2008/001 – Gennaio 2008.